Dwyer TSCC Bedienungsanleitung PDF herunterladen

Series TSCC Digital Dispensing Temperature Control

Specifications - Installation and Operating Instructions

Bulletin T-TSCC

DWYER INSTRUMENTS, INC.

Phone: 219/879-8000 www.dwyer-inst.com

P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]

SPECIFICATIONS

Probe Range:

PTC: -58 to 302°F (-50 to 150°C);

NTC: -58 to 230°F (-50 to 110°C).

Input: 2 free voltage contact input, 1 PTC thermistor 1000Ω @ 25°C

or 1 NTC thermistor 10K Ω @ 25°C.

Output:

1 each relay SPDT 16 A @ 240 VAC resistive, 5 A inductive;

2 each relay SPST 5 A @ 240 VAC resistive.

Control Type: ON/OFF.

Power Requirements: 115 VAC ±10%; 230 VAC ±10% (depending on

model).

Power Consumption: 4 VA.

Accuracy: ±1% FS.

Display: 3-digit and sign, 1/2˝ red LED digits.

Resolution: 1°.

Memory Backup: Nonvolatile memory.

Temperature Limits:

Operating: 32 to 158°F (0 to 70°C);

Storage: -4 to 176°F (-20 to 80°C).

Weight: 8.8 oz (250 g).

Front Panel Rating: IP64.

Agency Approvals: CE, cUL, UL.

The Series TSCC Digital Dispensing Temperature Control is used to

monitor and control product temperature and dispensing rate in the

production of melted cheese, chili, or other heated food products. One

selectable PTC or NTC thermistor is used to monitor the product

temperature while a SPDT relay is used to control the temperature. Two

SPST relays are used for controlling two dispensing rates for either

different size containers or different products. A three digit, easy-to-read

display is included on the controller. The buttons on the face of the

controller enable the user to program the desired control parameters.

Parameters can be copied from one device to another using our TS2-K

configuration key. Security protection is offered using a password code.

WIRING DIAGRAM

[

76.20]

-21/32

[67.39]

UNIT

1-7/64

[28.19]

1-11/32

[34.04]

Unit must be mounted away from vibration, impacts,

water and corrosive gases.

Cut hole in panel 2.80 x 1.14 in (71 X 29 mm).

Apply silicone or use the included rubber gasket around the perimeter of

the hole to prevent leakage.

Insert unit into the hole of panel.

NOTICE

POWER SUPPLY VOLTAGE

Take note of the power supply voltage marked on the

controller. Do not exceed the specified power supply voltage.

NOTICE

1 2

DWYER INSTRUMENTS, INC 1

Inhaltsverzeichnis

Seite 1 - DWYER INSTRUMENTS, INC

Series TSCC Digital Dispensing Temperature ControlSpecifications - Installation and Operating InstructionsBulletin T-TSCCDWYER INSTRUMENTS, INC. Phone

Seite 2

PARAMETERSParameter DescriptionsSP: Set point. Desired Product Regulation Temperaturer0: Differential or Hysteresisif temperature < SP – r0, load

Kommentare zu diesen Handbüchern

Keine Kommentare

Dwyer TSCC Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Router Dwyer TSCC herunter. Dwyer TSCC User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Router Dwyer TSCC