Dwyer DPMX Bedienungsanleitung PDF herunterladen

Series DPMX Extra Large Digital Panel Meter

Specifications - Installation and Operating Instructions

Bulletin G-62

The Series DPMX Extra Large LED Digital Panel Meter can easily be

viewed from across a room or in dark areas. The 2.3” LED segments are

available in red, green, or blue. These panel meters come equipped with

a universal power supply and user selectable process inputs to fit most

applications. The Series DPMX includes a mounting bracket that can be

adjusted up to 180°.

INSTALLATION

The Series DPMX is designed to be bezel mounted or gimbal mounted.

Mounting brackets are included in the box.

BEZEL MOUNT

Remove the two U-brackets from the back of the panel meter. Slide the

unit through the panel from the front. Next, attach the U-brackets to the

rear and tighten the four retaining bolts.

See Figure 1 for dimensions of the cutout.

Figure 1

GIMBAL MOUNT

If the panel meter is to be gimbal mounted, remove and discard the two

U-brackets from the back of the panel meter. Fasten the gimbal brackets

to the mounting surface using appropriate hardware. Lastly, fasten the

panel meter loosely to the gimbals using the thumbscrews. Note that

detents are provided on both sides of the case. Adjust the meter to the

desired viewing angle and securely tighten the thumb screws.

WIRING

The unit accepts signal inputs of 200 mVDC, 2 VDC, 5 VDC, 20 VDC,

10 VDC, and a 4 to 20 mA DC loop. The screw terminals for wiring are

located on the back of the adder board beneath the cover. The cable

clamps must be unfastened to access the screw terminals. In order to

reduce electrical noise, install the line voltage and the process signal

through separate cable clamps as shown in Figure 2.

Figure 2

On the terminal cover, remove two thin break out sections that best

match the diameter of the wiring cables being used.

DWYER INSTRUMENTS, INC.

Phone: 219/879-8000 www.dwyer-inst.com

P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]

SPECIFICATIONS

Inputs Ranges:

Set Voltage: ±200 mVDC, ±2 VDC, ±20 VDC;

Adjustable Voltage: 200 mVDC, 5 VDC, 10 VDC;

Adjustable Current: 0(4) to 20 mA DC.

Inputs Impedance:

Set Voltage: >1 MΩ (>10 MΩ on 200 mV range);

Adjustable Voltage: 392 kΩ;

Adjustable Current: 300Ω nominal.

Accuracy: ±(1% FS + 1 count).

Power Supply: 90 to 250 VAC @12 VA or 10.5 to 30 VAC/DC @ 6VA

(depending on model).

Display: 3-1/2 digits, 2.3˝ height, 7 segment LED.

Sampling Rate: 3 readings per second.

Operating Temperature: -10 to 50ºC.

Storage Range: -40 to 75ºC.

Warm Up: 10 minutes.

Mounting: 180º gimbal mounting with 30º stops or bezel mount.

REMOVABLE

COVER

29/32

[22.86]

[101.60]

-5/32

[

105.66]

-31/32

[

50.04]

INIMUM PANEL

LAMP DIM.

(

MAXIMUM PANEL

HICKNESS 1/2˝)

[

12.70]

(2-43/64)

[67.87]

0-19/32

[

261.11]

10-19/32

[269.24]

-7/64

[

78.99]

1 2

DWYER INSTRUMENTS, INC 1

Inhaltsverzeichnis

Seite 1 - DWYER INSTRUMENTS, INC

Series DPMX Extra Large Digital Panel MeterSpecifications - Installation and Operating InstructionsBulletin G-62The Series DPMX Extra Large LED Digita

Seite 2

OPERATIONFUNCTIONThe Series DPMX panel meter can be used with voltage or current signalinputs. It is important that the signal wires be connected to

Kommentare zu diesen Handbüchern

Keine Kommentare

Dwyer DPMX Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sensoren Dwyer DPMX herunter. Dwyer DPMX User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Dwyer DPMX