search

Dwyer CHP Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Pumpen Dwyer CHP herunter. Dwyer CHP User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
    • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Series CHP Pneumatic Hand Pump
Specifications - Installation and Operating Instructions
B
ulletin TE-CHP
The Series CHP Pneumatic Hand Pump is the most dependable and
rugged pump for applications up to 100 psi or 28.8˝ Hg Vacuum. The
durable Acetel plastic and anodized aluminum construction prevents
body heat transfer, resulting in drift-free, accurate readings. The Series
CHP is equipped with oversized check valves in order to provide smooth
and controlled operation. Dual O-Rings on all pistons ensure the pump
to be leak-free. The unit includes a 2 foot long hose, 1/8˝ female NPT
gauge fitting, and 1/8˝ NPT pipe plug. An optional hose kit is available so
that a tee is not required when connecting a sensor and a calibrator. The
Series CHP is ideal for checking calibration of pressure or vacuum
gauges, switches, or transmitters.
CAUTION
INSURE ALL GAUGES AND INSTRUMENTS TO BE CALIBRATED ARE
DISCONNECTED FROM PROCESS PRESSURES BEFORE
CONNECTING PUMP. THE MAXIMUM PUMP DESIGN PRESSURE IS
150 PSIG. CONNECTION TO A PRESSURE SOURCE GREATER
THAN 150 PSIG COULD CAUSE SERIOUS INJURY.
OPERATION
Pressure Venting Valve Cap:
The small, knurled pressure relief knob relieves pressure from the pump.
Turning the knob counterclockwise allows the system to vent in
increments as small as 0.01˝ of H2O. Do not over tighten the valve. See
Figure 1.
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000 www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]
SPECIFICATIONS
Output Range: CHP-P: 0 to 100 psi; CHP-V:0 to -28.8˝ Hg.
Process Connection: Two 1/8˝ female NPT parts, one with a removable
plug.
Materials: Acetel plastic and anodized aluminum.
Pressure Limit: 150 psig.
Temperature Limit: Not to exceed 150°F.
Displaced Volume: Approximately 4 in
3
.
Dimensions: 9˝ length x 1.5˝ diameter.
Weight: 1.5 lb (680 g).
11-19/32
[
294.48]
WHEN PUMP EXTENDED
1/4 NPT
G
AGE FITTING
8-21/32
[219.87]
W
HEN PUMP EXTENDED
1
/8 NPT PORT
SHOWN WITH CHIP-KIT INSTALLED
1
/8 NPT
PIPE PLUG
PRESSURE VENTING
V
ALVE CAP
ø1-1/2
[
38.1]
Figure 1
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - DWYER INSTRUMENTS, INC

Series CHP Pneumatic Hand PumpSpecifications - Installation and Operating InstructionsBulletin TE-CHPThe Series CHP Pneumatic Hand Pump is the most de

Seite 2

Variable Volume Chamber:By holding the pump housing and turning the vernier knob, the pump canbe adjusted to accurate pressure or vacuum settings. For

Kommentare zu diesen Handbüchern

Keine Kommentare
Verwandte Produkte und Handbücher für Pumpen Dwyer CHP
Pumpen Dwyer LPCP Bedienungsanleitung   (2 Seiten)
Pumpen Dwyer BCHP Bedienungsanleitung   (2 Seiten)
  • Damon AUX Sound Stream Palram Aquila 2050 Franke Consumer Products
  • Nokia Nein Gembird Schnittstellenkarten / Adapter Bryant Notebook-Hüllen Canon POS / mobile Drucker Sceptre Auto-TFT-Monitore
  • Supermicro H8SCM-F Xerox 7335 Toshiba PORTEGE M400 Acer Aspire 4220 Solis Mini Straightener Ceramic
  • Sony NWZ-E443 Bedienungsanleitung Samsung GT-E1205L Bedienungsanleitung Dynaudio BM9S II Bedienungshandbuch Seiko CAL. 7L22 Bedienungsanleitung Dell PowerConnect 3424P Bedienungsanleitung