Dwyer IPV Bedienungsanleitung PDF herunterladen

IPV Series Air Hammers

• One impact wave caused by one shot

• High strength aluminum structure

• Impact force and interval timing can be set based on requirement

• Magnetic hammer stores magnetic strength to increase the piston’s

impact power

Series IPV Air Hammer (single impact model) focuses on a limited

target. Other equipment of the target is minimally affected by it. The air

hammer’s impact won’t separate water out of humid mixtures. It is often

applied onto a pipe or clean elbow in a tank filled with humidity or low

specific gravity material.

HOW IT OPERATES

The IPV series air hammer contains a powerful magnet inside the

hammer. The hammer and magnet are tightly closed before activation.

However, as the inlet air pressure gets higher than the force, this

tightens the hammer and magnet. The hammer and magnet will

separate and cause more strength for impact power. The spring will

bring the hammer back to the initial position automatically after the

impact. By doing this, the air pressure will be released and the strength

of the air pressure will be delivered to the target impact container. It will

help to smooth the flow and prevent accumulation inside the container.

Series IPV Air Hammer

Specifications - Installation and Operating Instructions

Bulletin P-14

PROXIMITY CONTROLS

Phone: 219/879-8000 www.dwyer-inst.com

A DIVISION OF DWYER INSTRUMENTS, INC.

Fax: 219/872-9057 e-mail: [email protected]

P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A.

ØH

SPECIFICATIONS

Temperature Limit: 212°F (100°C).

Noise Level Range: 60-75 dBA.

Supply Pressure: 43.5 to 87 psi (3 to 6 bar).

Air Consumption: See model chart.

Air Connection: 1/4˝ BSPT female with 1/4˝ OD push to connect

adapter on IPV-1, IPV-2 and IPV-3; 3/8˝ BSPT female with 3/8˝ OD push

to connect adapter on IPV-4. Also includes muffler for exhaust port.

odel

PV-1

PV-2

PV-3

PV-4

.43˝ (138 mm)

.54˝ (166 mm)

.19˝ (208 mm)

0.56˝ (269 mm)

.15˝ (80 mm)

.94˝ (100 mm)

.51˝ (140 mm)

.77˝ (172 mm)

.36˝ (60 mm)

.95˝ (75 mm)

.13˝ (105 mm)

.51˝ (140 mm)

.47˝ (12 mm)

.63˝ (16 mm)

.94˝ (24 mm)

øH

0.35˝ (9 mm)

0.43˝ (11 mm)

0.59˝ (15 mm)

0.75˝ (19 mm)

onnection

/4˝

/8˝

Impulse

lbf•s (N•S)

Air Consumption

(l) per stroke

Weight

lb (kg)

2.43 (1.1)

3.97 (1.8)

8.82 (4.0)

18.52 (8.4)

Model

IPV-1

IPV-2

IPV-3

IPV-4

.225 (1.0)

.630 (2.8)

1.66 (7.4)

2.81 (12.5)

1.71 (0.028)

5.0 (0.082)

14.0 (0.228)

27.8 (0.455)

1 2

PROXIMITY CONTROLS 1

Inhaltsverzeichnis

Seite 1 - PROXIMITY CONTROLS

IPV Series Air Hammers• One impact wave caused by one shot• High strength aluminum structure• Impact force and interval timing can be set based on req

Seite 2

INSTALLATIONVibration force transmits more efficiently in a conical hopper tank asopposed to a rectangular hopper. It is recommended that yo

Kommentare zu diesen Handbüchern

Keine Kommentare

Dwyer IPV Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör fürs Wasser Dwyer IPV herunter. Dwyer IPV User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör fürs Wasser Dwyer IPV