Dwyer 681 Bedienungsanleitung PDF herunterladen

OPERATING INSTRUCTIONS

Series 681

SANITARY PRESSURE TRANSMITTERS

GENERAL INFORMATION

Your Dwyer Series 681Sanitary Pressure Transmitter has been carefully tested and

calibratedbefore shipment and it should be handled with the same care given any

precision instrument. Detailed performance information is listed on the specification

bulletin for the transmitter.

The 681 is designed according to 3A Standard #37-01 for sanitary installations. It has

a rugged MICRO-TIG welded stainless steel housing and is exceptionally insensitive to

vibration, shock, EMI/RFI interference and other environmental extremes. The 681 is

insensitive to the thermal shocks typical of CIP and SIP installations.

INSTALLATION NOTES

Series 681 should not require adjustment at installation. If adjustments are made it

is important to replace and tighten the zero and span screws (with O-rings) to

prevent moisture from entering.

The 681 is vented through the cable. Connections to the cable should be made in a

dry junction box vented to atmosphere. Insure that moisture cannot enter the end of the

cable.

The 681 is shipped with a rubber boot over the stainless steel pressure sensing

diaphragm to protect the diaphragm during shipment, storage, and handling prior to

installation. This boot should not be removed until the transmitter is to be installed and

should be used whenever the unit is removed from its installation. Do not contact the

diaphragm with sharp objects, screwdrivers or other mechanical devices.

Environment - The Series 681 Transmitter is designed to be used with any gas or liquid

compatible with 316L stainless steel (316 for ranges > 30 psig). It is designed to be

splash and drip proof for wash-down cleaning and can also be completely submerged

with the exception of the open end of the electrical cable.

Cleaning - The pressure sensing diaphragm will withstand normal high pressure

washing and partial vacuums created by fast cooling of steam sterilized tanks. However,

be sure not to exceed the proof pressure (listed on specification sheet). In high pressure

washing, care should be taken not to spray directly on diaphragm as it could result in

exceeding the proof pressure. The 681 can also be cleaned by dipping the diaphragm

in a container of cleaning solution or by wiping gently with a soft cloth.

Temperature Limits - The operating temperature limits of the 681, based on the limits

of the electronics, are -40

F to 260

Thermal Effects 20

F to 180

F range

Zero Shift ± 2.00% F.S./100

Span Shift ± 2.00% F.S./100

Mounting - The 681 will mount directly to a mating tri-clover flange along with a tri-clover

type clamp and gasket. (2 inch tri-clover for ranges up to 30 psig and 1.5 inch for higher

ranges.)

Note: The output signal is not appreciably affected by clamping forces so it is not neces-

sary to orient the flange circle to any special position for best performance.

LIMITED WARRANTY AND LIMITATION OF LIABILITY

DWYER warrants its products to be free from defects in materials and workmanship, subject to

the following terms and conditions: Without charge, DWYER will repair or replace products

found to be defective in materials or workmanship within the warranty period; provided that:

a) the product has not been subjected to abuse, neglect, accident, incorrect wiring not our own,

improper installation or servicing, or use in violation of instructions furnished by DWYER;

b) the product has not been repaired or altered by anyone except DWYER or its authorized

service agencies;

c) the serial number or date code has not been removed, defaced, or otherwise changed; and

d) examination discloses, in the judgment of DWYER, the defect in materials or workmanship

developed under normal installation, use and service;

e) DWYER is notified in advance of and the product is returned to DWYER transportation

prepaid.

Unless otherwise specified in a manual or warranty card, or agreed to in a writing signed by a

DWYER officer, DWYER pressure and acceleration products shall be warranted for one year

from date of sale.

The foregoing warranty is in lieu of all warranties, express, implied or statutory, including but not

limited to, any implied warranty of merchantability for a particular purpose.

DWYER’s liability for breach of warranty is limited to repair or replacement, or if the goods

cannot be repaired or replaced, to a refund of the purchase price. DWYER’s liability for all other

breaches is limited to a refund of the purchase price. In no instance shall DWYER be liable for

incidental or consequential damages arising from a breach of warranty, or from the use or

installation of its products.

No representative or person is authorized to give any warranty other than as set out above or to

assume for DWYER any other liability in connection with the sale of its products.

SS2092 Rev A 11/11/02

Dwyer Instruments, Inc.

102 Indiana Highway 212

Michigan City, Indiana 46360, U.S.A.

Phone: 800-872-9141/219-879-8868

Fax: 219/872-9057

Lit-By Fax: 888/891-4963

www.dwyer-inst.com

e-mail: info@dwyer-inst.com

1 2

Inhaltsverzeichnis

Seite 1

OPERATING INSTRUCTIONSSeries 681SANITARY PRESSURE TRANSMITTERSGENERAL INFORMATIONYour Dwyer Series 681Sanitary Pressure Transmitter has been carefully

Seite 2 - RETURNING PRODUCTS FOR REPAIR

2 3Venting - The 681 is vented to atmosphere through the cable to achieve best accuracy.This is particularly important for models with pressure ranges

Kommentare zu diesen Handbüchern

Keine Kommentare

Dwyer 681 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für elektrische Dwyer 681 herunter. Dwyer 681 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör für elektrische Dwyer 681